Home / Services / Service and Repair

Sign Repair and Service in Jacksonville, FL

When your signage stops working the way it should, you need someone who can actually fix it, not just quote you a replacement. Prime Sign Installation LLC provides sign repair and service for businesses across Northeast Florida.

80+
Years

Combined Team Experience

1-year
warranty

On sign installation work

Licensed & Insured

For Services in Northeast Florida

4-Truck
Fleet

With 48-60 ft. reaches

Sign Repair and Service Handled In Home

Whether your sign is flickering, damaged, or just showing its age, we diagnose the issue and get it fixed, using our own crew and equipment on every job.

Close-up of a scorched, melted wire connector and burned terminal block inside a sign's electrical box

Electrical Lighting and Repair

From ballast replacement to full re-wiring, handled by our own crew.

Installer in a hi-vis vest tightening the bolts where a pylon sign cabinet meets its steel pole

Structural repair and reinforcement

Loose panels, weakened mounts, and structural issues addressed at the source, not just patched.

Close-up of a gloved installer fastening a glowing orange channel letter to a raceway on a building facade at dusk

Panel and face replacement

Whether it’s one damaged panel or the full face, we replace what needs replacing.

Paint and finish repair

Refreshing faded, chipped, or peeling paint so your signage looks the way it’s supposed to.

Technician shining a flashlight on the rusty welds and bolts where a pylon sign cabinet meets its pole

Routine service calls

Not every repair is an emergency. We handle standard service calls on a schedule that works for you.

Technician measuring a crushed corner of a monument sign with a tape measure, with broken panel pieces on the grass

Storm and impact damage repair

From minor cosmetic damage to major structural fixes after severe weather.

THE PRIME SIGN DIFFERENCE

Unlike other sign companies, we’ll service signs that we didn’t initially install.If a different vendor installed your sign and it needs servicing now, or you’re just not sure who to call, we’re happy to take a look.

Signs You Need Sign Repair or Service

Not sure if it’s time to call? Here’s what usually brings business owners to us:

Flickering, dim, or dead lights: Often an electrical or ballast issue, and one of the most common calls we get. Left alone, it usually gets worse, not better.

Faded, chipped, or peeling paint and sign faces: Sun and humidity break down paint and vinyl over time. Beyond looking worn, this can also make your signage harder to read from the road.

Loose, shifting, or unstable panels: Usually a sign that mounting hardware has weakened or shifted, which can become a safety issue if left unaddressed.

Sign not powering on at all: Could be anything from a tripped breaker to a failed transformer. Worth having someone diagnose it rather than guessing.

Unusual noise, buzzing, or electrical issues: Not just annoying, this can be an early warning sign of a bigger electrical problem.

Visible damage after a storm: Northeast Florida sees its share of severe weather, and storm damage to signage is common enough that we handle it regularly.

If you are experiencing any of these with your sign, reach out and we’d be happy to take a look.

Storm-damaged pylon sign lying in a wet shopping center parking lot with its face shattered and LED modules exposed

Why Sign Repair Shouldn't Wait

A damaged or malfunctioning sign is more than a cosmetic issue. It’s often the first thing a customer sees before they ever walk through your door, and a flickering, faded, or broken sign can quietly cost you business without you realizing it. Beyond appearance, some issues (loose panels, electrical faults, structural wear) can become safety hazards or code violations if left unaddressed. Getting ahead of small issues is also almost always less costly than waiting until a full sign replacement becomes the only option.

Ready to Get Your Sign Serviced?

Reach out and we’ll walk you through the next steps for getting your sign repaired.

Our Sign Service and Repair Process

Here’s how our service calls work.

1

Reach Out to Us

Reach out by phone, email, or the form on this site. Give us a quick description of the issue, so we can prepare for the visit.

2

We Schedule a Service Call

We'll set up a time for our in-house crew to come out and take a look.

3

We'll Diagnose the Issue On-Site

Service work is billed on a time and material basis, with a two-hour minimum. Once we've taken a look, we'll give you an estimate and a not-to-exceed amount before any work begins.

4

We Get Your Approval on Any Changes

If the job ends up needing more time or parts than expected, we'll explain and get your approval before doing any additional work.

5

We Complete the Repair

Handled start to finish by our own crew, no surprises once the work is underway.

Our sign was partially lighting up, and Prime quickly assessed the issue and gave us recommendations. Prices were reasonable and they were very pleasant to work with.

Why Jacksonville Businesses Trust Us for Sign Repair

Every repair is handled by our own in-house crew, using our own trucks and equipment – no subcontractors. We’re licensed and insured throughout Northeast Florida, and any new part we install during a repair carries the same one-year warranty as a full installation. Every job also comes with documentation, so there’s a clear record of what was done.

PROUDLY SERVING JACKSONVILLE, NORTHEAST FLORIDA, AND SOUTHEAST GEORGIA

Prime Sign Installation LLC is based in Jacksonville, FL, and provides sign installation and service throughout Northeast Florida and into Southeast Georgia, including:

  • Jacksonville
  • St. Augustine
  • Lake City
  • Gainesville
  • Brunswick, GA
  • Savannah, GA
  • Valdosta, GA 

Don’t see your area listed? Reach out, we may still be able to help.

Frequently Asked Questions About Our Sign Services

Do you repair signs you didn't install?

Yes. We service and repair signage regardless of who installed it originally. If you inherited a sign from a previous vendor, we’re happy to take a look.

Response time depends on the issue and our current schedule, but we’ll always give you a realistic timeframe when you reach out. If it’s urgent, let us know, we also handle emergency repairs.

Electrical and lighting issues (flickering, dim, or dead sign lights) are among the most frequent calls we get, along with storm-related damage and general wear like faded paint or loose panels.

Repairs we perform are backed by a one-year warranty on the work itself. If a different part of the sign that we didn’t service fails afterward, that’s not covered under this warranty. Older neon components also aren’t warrantied due to their age, but all LED and new-part repairs are covered under our standard one-year terms.

Repair work is typically billed on a time and material basis, with a two-hour minimum. Before we start, we’ll give you an estimate and a not-to-exceed amount. If the job ends up needing more time or parts than expected, we’ll call you to explain and get your approval before doing any additional work.

We don’t offer free on-site estimates, since an accurate quote often requires time, equipment, and travel. What we do offer is honest, upfront pricing based on the details of your project, with no hidden surprises once the work begins.

We’re based in Jacksonville, FL, and provide sign repair and service throughout Northeast Florida and into Southeast Georgia. If you’re not sure whether you’re in our service area, reach out and we’ll let you know.